Box gutter

A box gutter, internal gutter, parallel gutter, or trough gutter is a rain gutter on a roof usually rectangular in shape; it may be lined with EPDM rubber, metal, asphalt, or roofing felt, and may be concealed behind a parapet or the eaves, or in a roof valley.[1][2][3]

Box gutters are essentially placed between parallel surfaces, as in a valley between parallel roofs or at the junction of a roof and a parapet wall. They should not be confused with so-called valley gutters or valley flashings which occur at the non-parallel intersection of roof surfaces, typically at right angled internal corners of pitched roofs. Provision is made in the design of the gutter to have a rain flow to the outlet with a maximum slope of 1:200 and a minimum of 1:400.

Gallery of sketches

Note! The sketches in this section reference terminology commonly used in the UK and Australia.[2]

  • A section through a box gutter at the intersection of the bottom of a sloping roof and a parapet wall.
    A section through a box gutter at the intersection of the bottom of a sloping roof and a parapet wall.
  • A simpler box gutter arrangement at a parapet wall that give a bare minimum of compliance to the Building Code of Australia (BCA)
    A simpler box gutter arrangement at a parapet wall that give a bare minimum of compliance to the Building Code of Australia (BCA)
  • A box gutter between two parallel roof surfaces.
    A box gutter between two parallel roof surfaces.
  • A sketch of a now illegal gutter construction under the BCA. A design to be avoided.
    A sketch of a now illegal gutter construction under the BCA. A design to be avoided.

References

  1. ^ Dictionary of Architecture & Construction, C.M.Harris.
  2. ^ a b Glossary of Australian Building Terms - Third Edition.(NCRB)
  3. ^ "Different Types of Gutters to Protect Your Home". Clean Gutter Protection. Retrieved 2024-04-19.

External links

  • An Illustrated glossary of roofs and roofing terms.


  • v
  • t
  • e